beautypg.com

Allied Telesis AT-FS970M Series User Manual

Page 191

background image

AT-FS970M Series Version 2.3.1.0 Web Interface User’s Guide

191

Configuring RADIUS for Remote Manager Authentication

To configure remote manager authentication using RADIUS and add
RADIUS servers to the switch, perform the following:

“Configuring Remote Manager Authentication Using RADIUS” on
page 191

“Adding a RADIUS Server” on page 193

Configuring

Remote Manager

Authentication

Using RADIUS

To configure the RADIUS server, do the following:

1. Hover the cursor over the Security tab.

The Security tab is displayed. See Figure 68 on page 182.

2. From the Security tab drop-down menu, select Authentication

Servers.

The Authentication Server Configuration page with the RADIUS tab
selected is displayed. See Figure 71.

Figure 71. Authentication Server Configuration Page with RADIUS Tab

3. Change the following fields as needed:

Timeout Value— Enter the length of the time, in seconds, that the
switch waits for a response from a RADIUS server to an