Allied Telesis AT-FS970M Series - Manual (Page 138)

Chapter 11: Setting Port-based and Tagged VLANs
138
4. Change the following fields as needed:
 VLAN Name— Change the name of a VLAN. The name can be
from 1 to 20 characters in length. The first character must be a
letter; it cannot be a number. A name cannot contain spaces or
special characters, such as asterisks (*) or exclamation points (!).
You cannot assign the name of an existing VLAN on the switch.
VLANs are easier to identify if their names reflect the functions of
their subnetworks or workgroups (for example, Sales or
Accounting). If a VLAN is unique in your network, then its name
must be unique as well. A VLAN that spans multiple switches must
have the same name on each switch.
 Device ID— Assign a “T”, “U”, or “H” by clicking a port number until
the desired choice appears in the box below the port number. A “T”
indicates the port is a tagged port. A “U” indicates the port is an
untagged port. An "H" indicates the port does not belong to any
VLANs on the switch as an untagged port. To remove the port from
the VLAN, click the port number until the box is unchecked.
Note
When a port does not have any mark, the port belongs to the default
VLAN. When you assign an “H” to a port, the switch removes the
untagged port from the VLAN and also removes the untagged port
from the default VLAN. For more information, see “Removing an
Untagged Port from a VLAN” on page 141.
 All Tagged— Click this button to make all ports on the switch
tagged ports.
 All Untagged— Click this button to make all ports on the switch
untagged ports.
 Deselect All— Click this button to deselect, or uncheck, all of the
selected ports.
5. Click Apply.
A confirmation message is displayed.
6. Click SAVE to save your changes to the startup configuration file.