beautypg.com

Adding an ipv6 address – Allied Telesis AT-FS970M Series User Manual

Page 225

background image

AT-FS970M Series Version 2.3.1.0 Web Interface User’s Guide

225

Adding an IPv6 Address

The switch supports only one IPv6 address. As a result, you can add an
IPv6 address only when no IPv6 address is assigned to the switch.

To assign an IPv6 address, do the following:

1. Hover the cursor over the Layer 3 tab.

The Layer 3 tab is displayed. See Figure 87 on page 223.

2. From the Layer 3 tab drop-down menu, select IPv6 Interface.

The IPv6 Interface page is displayed. Ensure that no IPv6 address is
displayed.

3. Click Add.

The IPv6 Management Configuration Page is displayed. See
Figure 89.

Figure 89. IPv6 Management Configuration Page

4. Select a VLAN to assign to the IPv6 address by using the pull-down

menu next to the Interface Name field.

You can only select a VLAN that you have configured previously. For
information about how to assign a VLAN, see Chapter 11, “Setting
Port-based and Tagged VLANs” on page 131.