beautypg.com

Selecting lldp tlvs on a port, Figure 126: lldp tlv tab – Allied Telesis AT-FS970M Series User Manual

Page 290

background image

Chapter 25: LLDP and LLDP-MED

290

Selecting LLDP TLVs on a Port

To enable LLDP TLV, do the following:

1. Hover the cursor over the Discovery & Monitoring tab.

The Discovery & Monitoring tab is displayed. See Figure 122 on
page 284.

2. From the Discovery & Monitoring tab, hover over LLDP.

The LLDP tab is displayed.

3. From the LLDP tab, hover over TLV.

The LLDP TLV tab is displayed in Figure 126.

Figure 126. LLDP TLV Tab

4. Move your cursor to the right and select TLV again.

The LLDP TLV page is displayed. See Figure 127 on page 291.