Allied Telesis AT-FS970M Series - Manual (Page 238)

Chapter 20: Access Control Lists (ACL)
238
MAC Address and mask: Select MAC, then enter a MAC
source address followed by a slash (/) and a mask if you are
creating a MAC ACL. The keyword “any” matches all packets
on the destination address. The wildcard mask for MAC
addresses must be either “0” (zero) or “F” to indicate the parts
of MAC address to filter. “F” means anything; “0” (zero) means
it has to match.
Note
The Source Port and Destination Port fields are applicable only to
IPv4 ACLs.
 Source Port— Select TCP or UDP from the pull-down menu and
enter a source port number as needed. This field is optional.
 Destination Port— Select TCP or UDP from the pull-down menu
and enter a source port number as needed. This field is optional.
 VLAN ID— Enter a VLAN ID. Use this field if you want the ACL to
filter tagged packets.
Note
The matching criteria of CoS and DSCP are for the Quality of
Service (QoS) feature. For information about creating a QoS, see
“Creating a QoS Policy” on page 255.
5. Click Create Classifier.
6. Click SAVE to save your changes to the startup configuration file.