Allied Telesis AT-FS970M Series - Manual (Page 219)

AT-FS970M Series Version 2.3.1.0 Web Interface User’s Guide
219
Adding an IPv4 Address
To assign an IPv4 address, do the following:
1. Hover the cursor over the Layer 3 tab.
The Layer 3 tab is displayed. See Figure 83 on page 218.
2. From the Layer 3 tab drop-down menu, select IPv4 Interfaces.
A list of IPv4 interfaces is displayed. See Figure 84 on page 218.
3. Click Add.
The IP Address Configuration Page is displayed. See Figure 85.
Figure 85. IP Address Configuration Page
4. Enter the following fields:
 IP Address— Enter the IP address that you want to add.
 Subnet Mask— Enter the subnet mask of the IPv4 address in
quad-dotted decimal representation, for example, 255.255.255.0.
 VLAN— Select the VLAN ID that you want to assign the IPv4
address to.
5. Click Add.
6. Click SAVE to save your changes to the startup configuration file.