Allied Telesis AT-FS970M Series - Manual (Page 200)

Chapter 17: RADIUS and TACACS+ Clients
200
Deleting an Authentication Server
To delete either an TACACS+ or RADIUS authentication server, do the
following:
1. Hover the cursor over the Security tab.
The Security tab is displayed. See Figure 68 on page 182.
2. From the Security tab drop-down menu, select Authentication
Servers.
The Authentication Server Configuration page is displayed. See Figure
71 on page 191.
3. Click either the TACACS+ or the RADIUS tab, depending on the type
of server you want to delete.
4. Click Delete next to the server that you want to delete.
5. Click SAVE to save your changes to the startup configuration file.