Allied Telesis AT-FS970M Series - Manual (Page 184)

Chapter 16: MAC Address-based Port Security
184
Modifying MAC Address-based Port Security Settings
To the modify the MAC address-based port security settings, do the
following:
1. Hover the cursor over the Security tab.
The Security tab is displayed. See Figure 68 on page 182.
2. From the Security tab drop-down menu, select MAC Based Security.
The MAC Based Port Security page is displayed. See Figure 69 on
page 182.
3. Click Edit next to the port that you want to modify.
The Modify MAC Based Port Security page is displayed. See
Figure 70.
Figure 70. Modify MAC Based Port Security Page