Allied Telesis AT-FS970M Series - Manual (Page 317)

AT-FS970M Series Version 2.3.1.0 Web Interface User’s Guide
317
 System Capabilities— Device’s router and bridge functions, and
whether or not these functions are currently enabled.
 Management Address— IP address of the local LLDP agent. This
is used to obtain information related to the local device.
 Port VLAN— VID of the VLAN in which the transmitting port is an
untagged member.
 Port and Protocol VLANs— Indicates whether the device
supports protocol VLANs and, if it does, the protocol VLAN
identifiers. This field is not supported on the AT-FS970M switches.
 VLAN Names— Lists the names of the VLANs in which the
transmitting port is either an untagged or tagged member.
 Protocol IDs— List of protocols that are accessible through the
port, for instance:
- 9000 (Loopback)
- 0026424203000000 (STP, RSTP, or MSTP)
- 888e01 (802.1x)
- AAAA03 (EPSR)
- 88090101 (LACP)
- 00540000e302 (Loop protection)
- 0800 (IPv4)
- 0806 (ARP)
- 86dd (IPv6)
 MAC Phy Config— Speed and duplex mode of the port and
whether the port was configured with Auto-Negotiation.
 Power Management— Power via MDI capabilities of the port.
 Link Aggregation— Indicates whether the port is capable of link
aggregation and, if so, whether or not it is currently a member of an
aggregator.
 Max Frame Size— Maximum supported frame size the port can
send. This field is not adjustable on the switch.