Allied Telesis AT-FS970M Series - Manual (Page 268)

Chapter 23: Setting Dynamic Routes Using RIP
268
Figure 115. RIP Interface Page
3. Specify the following fields as needed:
 IP Interface— Select the VLAN interface to associate with the RIP
routing process. This VLAN interface receives and sends RIP
packets, and the network where the VLAN belongs is advertised
through RIP.
 Authentication Mode— Select the authentication mode for the
VLAN interface. Choose MD5, Text, or None.
 Authentication Key— Enter the authentication password that the
VLAN interface uses to authenticate the RIP packets. The
authentication password can be up to sixteen alphanumeric
characters. It is case-sensitive and can include spaces.
 Send Type— Select the RIP version of packets that the VLAN
interface sends. Choose RIP1, RIP2, Both, or RIP1 Compatible.
RIP 1 Compatible causes version 2 RIP to broadcast, instead of
multicast, the packets.
 Receive Type— Select the RIP version of packets that the VLAN
interface receives. Choose RIP1, RIP2, or Both.
4. Click Add.
5. Click SAVE to save your changes to the startup configuration file.