Allied Telesis AT-FS970M Series - Manual (Page 260)

Chapter 22: Quality of Service (QoS)
260
Assigning a QoS Policy to Ports
Before assigning QoS policies to ports, QoS policies must be available on
the switch. For how to create a QoS policy, see “Creating a QoS Policy” on
page 255.
To assign a QoS policy to ports, do the following:
1. Hover the cursor over the ACLs & QoS tab.
The ACLs & QoS tab is displayed. See Figure 103 on page 255.
2. From the ACLs & QoS tab drop-down menu, select Policies/ACLs.
The Policies/ACLs page is displayed. See Figure 109.
Figure 109. Policies/ACLs Page
3. Click Add on the right above the table.
The Traffic Classifiers page is displayed. See Figure 110 on page 261.