beautypg.com

Allied Telesis AT-FS970M Series User Manual

Page 126

background image

Chapter 10: Setting Static Port Trunks

126

Figure 49. Add Static Trunk Page

5. Assign an ID number of a new static trunk in the Trunk ID field. The

range is 1 to 32.

6. Select the Load Balance Method. You can assign different load

distribution methods to different static trunks on the same switch.

Choose from the following:

Src MAC— Source MAC address.

Dst MAC— Destination MAC address.

Src-Dst MAC— Source address and destination MAC address.

Src IP— Source IP address.

Dst IP— Destination IP address.

Src-Dst IP— Source address and destination IP address.

7. Select a member port in the Device ID table by clicking a box that

indicates a port number. You can select multiple ports. A green check
mark indicates a port has been selected.

To deselect a port, click the box that indicates the port number.

8. Click Add.

A confirmation message is displayed.

9. Click SAVE to save your changes to the startup configuration file.