Allied Telesis AT-FS970M Series - Manual (Page 182)

Chapter 16: MAC Address-based Port Security
182
Displaying MAC Address-based Port Security Settings
To display the MAC address-based port security settings, do the following:
1. Hover the cursor over the Security tab.
The Security tab is displayed. See Figure 68.
Figure 68. Security Tab
2. From the Security tab drop-down menu, select MAC Based Security.
The MAC Based Port Security page is displayed. See Figure 69.
Figure 69. MAC Based Port Security Page
The following fields are displayed:
 Interface— Port ID.
 MAC Security— Indicates MAC address-based security is either
“Enabled” or “Disabled” on a port. By default, this setting is
disabled.
 Aging— Indicates one of the following: