beautypg.com

Changing ipv6 addresses – Allied Telesis AT-FS970M Series User Manual

Page 227

background image

AT-FS970M Series Version 2.3.1.0 Web Interface User’s Guide

227

Changing IPv6 Addresses

To edit the management IPv6 interface, do the following:

1. Hover the cursor over the Layer 3 tab.

The Layer 3 tab is displayed. See Figure 87 on page 223.

2. From the Layer 3 tab drop-down menu, select IPv6 Interface.

The IPv6 interface is displayed if one has already been assigned. See
Figure 88 on page 223.

3. From the IPv6 Interface page, click Edit.

The following page is displayed. See Figure 90.

Figure 90. Edit IPv6 Management Configuration Page

4. Change the following fields as needed:

VLAN— Select the VLAN number that the management IPv6
address is assigned to.

IP Address— Enter the management IPv6 address.

Subnet Mask— Enter the number of subnet mask bits of the
management IPv6 address.

Default Gateway IP— Enter the default gateway IPv6 address.