Allied Telesis AT-FS970M Series - Manual (Page 78)

Chapter 5: Setting Port Statistics
78
Figure 30. Port Statistics with the Receive Tab
The following fields are displayed:
 Interface— Port ID.
 Total Bytes— Number of received bytes.
 Total Frames— Number of received frames.
 Total Error Frames— Total number of received frames with
errors.
 Multicast Frames— Number of received multicast frames.
 Broadcast Frames— Number of received broadcast frames.
 CRC Error Frames— Number of frames with a cyclic redundancy
check (CRC) error, but with the proper length (64 -1518 bytes)
received by the port.
 FCS Error Frames— Number of ingress frames that had frame
check sequence (FCS) errors.
 Pause Frames— Number of received flow-control pause frames.
 Oversized Frames— Number of received frames that exceeded
the maximum size as specified by IEEE 802.3 (1518 bytes,
including the CRC).
 Fragmented Frames— Number of received fragmented frames.
 Jabber Frames— Number of occurrences of corrupted data or
useless signals the port has encountered.
Note
The following fields are not displayed in Figure 30.