Allied Telesis AT-FS970M Series - Manual (Page 156)

Chapter 13: Internet Group Management Protocol (IGMP) Snooping
156
Clearing the Routers List
To clear the group membership on the IGMP Routers List, do the
following:
1. Hover the cursor over the Switching tab.
The Switching tab is displayed. See Figure 56 on page 151.
2. Hover over IGMP and then move the cursor to the right to select IGMP
Snooping.
The IGMP Snooping page is displayed with the Configuration tab
selected by default. See Figure 57 on page 152.
3. Click the Routers List tab.
The IGMP Snooping page with the Routers List tab selected is
displayed. See Figure 58 on page 155.
4. Click Clear group membership to remove all multicast router ports in
the list.