Allied Telesis AT-FS970M Series - Manual (Page 207)

AT-FS970M Series Version 2.3.1.0 Web Interface User’s Guide
207
Enabling 802.1x Port-based Authentication on the Switch
To enable the 802.1x port-based Authentication feature on a switch, do
the following:
1. Hover the cursor over the Security tab.
The Security tab is displayed. See Figure 68 on page 182.
2. From the Security tab drop-down menu, select 802.1x Port
Authentication.
The 802.1x Authentication page is displayed. See Figure 79.
Figure 79. 802.1x Authentication Page
3. Use the pull-down menu next to the Status field to select “Enabled.”
The default setting is “Disabled.”
4. Click Apply.
5. Click SAVE to save your changes to the startup configuration file.