Allied Telesis AT-FS970M Series - Manual (Page 263)

263
Chapter 23
Setting Dynamic Routes Using RIP
The chapter provides a brief description of the RIP feature and explains
how to display the RIP settings, enable RIP on a VLAN interface, change
the RIP settings, delete a VLAN interface, and display RIP statistics. See
the following sections:
 “Overview” on page 264
 “Displaying the RIP Configuration” on page 265
 “Enabling RIP on a VLAN Interface” on page 267
 “Changing the RIP Settings” on page 270
 “Removing a VLAN Interface from the RIP Configuration” on page 271
 “Displaying RIP Statistics” on page 272
 “Reloading RIP Statistics” on page 274
For more information about RIP, see the following chapters in the AT-
FS970M Series Version 2.3.1.0 Management Software Command Line
Interface User’s Guide:
 Routing Information Protocol (RIP)
 Routing Information Protocol (RIP) Commands