Allied Telesis AT-FS970M Series - Manual (Page 185)

AT-FS970M Series Version 2.3.1.0 Web Interface User’s Guide
185
4. Change the following settings as needed:
 Interface— Indicates the port number. You cannot change this
parameter from this page.
 MAC Security— Select between “Enabled” and “Disabled” to
activate or deactivate MAC address-based security on the port.
 Aging— Select how the switch saves source MAC addresses to
the MAC address table. Choose from the following options:
Yes: Saves the source MAC addresses as dynamic addresses
in the MAC address table.
No: Saves the source MAC addresses as static addresses in
the MAC address table.
 MAX MACs— Enter the maximum number of source MAC
addresses that the switch can learn and store for the port. The
range is 0 to 255. The default is 100 addresses.
 Violation Action— Select the intrusion action of the port. Choose
from the following:
Protect: Discards invalid frames.
Restrict: Discards invalid frames and sends SNMP traps.
Shut Down: Sends SNMP traps and disables the port.
5. Click Apply.
6. Click SAVE to save your changes to the startup configuration file.