Allied Telesis AT-FS970M Series - Manual (Page 142)

Chapter 11: Setting Port-based and Tagged VLANs
142
Deleting VLANs
Caution
Deleting VLANs that active ports belong to may cause loss of
connectivity to the switch.
To delete a VLAN, do the following:
1. Hover the cursor over the Switching tab.
The Switching tab is displayed. See Figure 24 on page 65.
2. From the Switching tab drop-down menu, select VLANs.
The VLANs page is displayed. See Figure 51 on page 134.
3. From the VLANs page, click Delete next to the VLAN that you want to
remove.
The selected VLAN is removed.
Note
You cannot remove the default VLAN, which has a VLAN ID of 1.
4. Click SAVE to save your changes to the startup configuration file.