Allied Telesis AT-FS970M Series - Manual (Page 123)

AT-FS970M Series Version 2.3.1.0 Web Interface User’s Guide
123
Displaying Static Trunk Settings
To display the static port trunks for all of the switch ports, do the following:
1. Hover the cursor over the Switching tab.
The Switching tab is displayed. See Figure 24 on page 65.
2. From the Switching tab, hover over Link Aggregation.
For an example of the Link Aggregation tab, see Figure 47.
Figure 47. Switching Tab with Static Trunks
3. Move the cursor to the right and select Static Trunks.
The Static Trunks page is displayed as shown in Figure 48. By default,
no static trunks are specified on the switch.
Figure 48. Static Trunks Page
The following fields are displayed:
 Trunk ID— ID number of the static trunk.
 Load Balance Method— Indicates one of the following:
Src MAC: Source MAC address is the load distribution method.