Allied Telesis AT-FS970M Series - Manual (Page 151)

AT-FS970M Series Version 2.3.1.0 Web Interface User’s Guide
151
Displaying and Modifying IGMP Snooping Configuration
To display and modify the IGMP Configuration settings, do the following:
1. Hover the cursor over the Switching tab.
The Switching Tab is displayed. See Figure 56.
Figure 56. Switching IGMP Tab
2. Hover over IGMP and then move the cursor to the right to select IGMP
Snooping.
The IGMP Snooping Configuration page is displayed. See Figure 57
on page 152.