Allied Telesis AT-FS970M Series - Manual (Page 285)

AT-FS970M Series Version 2.3.1.0 Web Interface User’s Guide
285
Figure 123. LLDP Configuration Page
4. Change the following fields as needed:
 Status— To enable or disable LLDP on the switch, select Enabled
or Disabled from the drop-down menu. By default, LLDP is
disabled.
 Timer— Enter the transmit interval of LLDP advertisements. The
transmit interval must be at least four times the transmission delay
timer (Tx Delay). The range is 5 to 32,768 seconds. The default
value is 30 seconds.
 Fast Start Count— Enter a fast start count for LLDP-MED. The
fast start count determines how many fast start advertisements
LLDP sends from the port when it begins sending LLDP-MED
advertisements, for instance when it detects a new LLDP-MED
capable device. The range is 1 to 10. The default value is 3.