Allied Telesis AT-FS970M Series - Manual (Page 186)

Chapter 16: MAC Address-based Port Security
186
Disabling MAC Address-based Port Security Settings
To deactivate MAC address-based port security settings, do the following:
1. Hover the cursor over the Security tab.
The Security tab is displayed. See Figure 68 on page 182.
2. From the Security tab drop-down menu, select MAC Based Security.
The MAC Based Port Security page is displayed. See Figure 69 on
page 182.
3. Click Edit next to the port that you want to remove.
The Modify MAC Based Port Security page is displayed. See Figure
70 on page 184.
4. Use the pull-down menu next to the MAC Security field and select
“Disabled.”
5. Click Apply.
6. Click SAVE to save your changes to the startup configuration file.