Allied Telesis AT-FS970M Series - Manual (Page 29)

AT-FS970M Series Version 2.3.1.0 Web Interface User’s Guide
29

System Name— Name of the switch. To specify this field, see
“Setting the Switch Information” on page 48.

Version— Software version number of the Management Software.

Contact— Contact person for the switch. To specify this field, see
“Setting the Switch Information” on page 48.

Location—Location of the switch. To specify this field, see “Setting
the Switch Information” on page 48.
The Services section displays the following information:

IPv6 Management— Indicates if IPv6 Management is enabled or
disabled on the switch.

SNMP— SNMP setting of the switch.

HTTP— HTTP setting of the switch.

Telnet— Indicates if Telnet is enabled or disabled on the switch.

SSH— Indicates if SSH is enabled or disabled on the switch.

Remote Logging— Indicates if the remote logging is enabled or
disabled on the switch.

Spanning Tree— Indicates if STP, RSTP, or MSTP is enabled on
the switch. The default setting is “RSTP.”

QoS— Indicates if QoS is enabled or disabled on the switch.

LLDP— Indicates if LLDP is enabled or disabled on the switch.

sFLOW— Indicates if sFlow is enabled or disabled on the switch.

IGMP Snooping— Indicates if IGMP Snooping is enabled or
disabled on the switch.

IGMP Snooping Querier— Indicates if IGMP Snooping Querier is
enabled or disabled on the switch.

802.1x Port Authentication— Indicates if 802.1x Port
Authentication is enabled or disabled on the switch.

RIP— Indicates if RIP is enabled or disabled on the switch.
The Administration Options section displays the following information:

System Upgrade— Select this field to upgrade your system
software. See “Upgrading the Software” on page 58.

Reboot— Select this field to reboot the switch. For instructions,
see “Rebooting a Switch” on page 57.