Allied Telesis AT-FS970M Series - Manual (Page 139)

AT-FS970M Series Version 2.3.1.0 Web Interface User’s Guide
139
Assigning a Native VLAN
A VLAN can be assigned to a tagged port so that untagged ingress traffic
is placed on the VLAN. This VLAN is referred to as the native VLAN.
To assign a native VLAN to a tagged port, perform the following
procedure:
1. Hover the cursor over the Switching tab.
The Switching tab is displayed. See Figure 24 on page 65.
2. From the Switching tab drop-down menu, select VLANs.
The VLANs page is displayed. See Figure 51 on page 134.
3. From the VLANs page, click Add.
The Add VLAN page is displayed. See Figure 52 on page 135.
4. From Add VLANs page, click Native VLAN.
The Native VLAN page is displayed. See Figure 54.
Figure 54. Native VLAN Page