Allied Telesis AT-FS970M Series - Manual (Page 137)

AT-FS970M Series Version 2.3.1.0 Web Interface User’s Guide
137
Modifying VLANs
To modify the VLAN settings, see the following procedure:
Caution
Modifying the VLAN membership of active ports may cause loss of
connectivity to the switch.
1. Hover the cursor over the Switching tab.
The Switching tab is displayed. See Figure 24 on page 65.
2. From the Switching tab drop-down menu, select VLANs.
The VLANs page is displayed. See Figure 51 on page 134.
3. From the VLANs page, click Edit next to the VLAN ID that you want to
modify.
The Edit VLAN page is displayed. See Figure 53.
Figure 53. Edit VLAN Page