Allied Telesis AT-FS970M Series - Manual (Page 177)

AT-FS970M Series Version 2.3.1.0 Web Interface User’s Guide
177
 PoE Device Description— Enter the description of the PoE
device that is connected to the port. The description can contain up
to 256 alphanumeric characters. Spaces and special characters
are allowed.
 PoE Port Power Limit (4000 ~ 30000)— Enter the power limit in
milliwatts (mW) that the switch provides to a device connected to
the port. The default is 15400 mW.
 PoE Legacy Device— Select “Yes” to allow the switch to supply
power to a device that is connected to the port, even if the device is
a legacy PD. Select “No” to not allow the switch to supply power if
a device that is connected to the port is a legacy PD. By default,
the PoE switch does not supply power to legacy PDs.
Legacy PDs are PoE devices that were designed before the IEEE
802.3af and IEEE 802.3at PoE standards were finalized.
 PoE Port Priority— Select the PoE port priority from Low, High or
Critical. For more details, see “Port Prioritization” on page 171.
5. Click Apply.
6. Click SAVE to save your changes to the startup configuration file.