7 recalling the home position, 8 enabling the wiper (wiper), 9 enabling the washer (washer) – Videotec MAXIMUS MPXT User Manual
Page 68: 10 reboot the device

EN - English - I
nstruc
tions manual
66
10.7 Recalling the Home position
Using the control keyboard it is possible to recall
a previously saved Home position (Scan No. 1)
(for further information, refer to the manual of the
keyboard in use).
10.8 Enabling the Wiper (Wiper)
Do not use the wiper when the outside
temperature is below 0°C or in case of ice.
To enable/disable the Wiper refer to the manual of
the keyboard or to Tab. 11, page 68.
If it is left on, the Wiper automatically
disables itself.
10.9 Enabling the Washer
(Washer)
Do not use the wiper when the outside
temperature is below 0°C or in case of ice.
To enable/disable the Washer refer to the manual of
the keyboard or to Tab. 11, page 68.
To configure the Washer, refer to 9.6.7 Washer Menu,
10.10 Reboot the device
By means of the control keyboard it is possible to
send the device resetting command (for further
information, refer to the manual of the keyboard in
use or to Tab. 11, page 68.