Videotec MAXIMUS MPXT - Manual (Page 61)

Instruc
tions manual - English - EN
59
Then edit the other parameters, for example:
• Date Setting: To set date and time.
• Video Setting: To change resolution (720x576,
640x480, 352x288, 176x144) bit rate (setting
between 28kbit and 3 Mbit).
For telemetry, leave the default settings.
Fig. 118
After all the settings have been inserted, remember
to Save & Reboot, so that the changes will take effect.
• Factory Default: Used to restore default factory
settings.
Before doing any technical work or
maintenance on the device, make sure
that potentially explosive atmosphere is
not present. To reduce the risk of ignition
don’t open the device when a potentially
explosive atmosphere is present.
Before starting any operation, make sure
the power supply is disconnected.
In extreme cases, when you have forgotten
the password for accessing the unit via the
browser, you can also restore the factory
setting by connecting the reset switch
board situated inside the package and
pressing the Reset button.
For Reset to take effect, you have to disconnect the
power supply to the pan & tilt.
Remove the hexagon set screw and unscrew the
treaded cover of the junction box.
01
02
Fig. 119