Videotec MAXIMUS MPXT - Manual (Page 45)

Instruc
tions manual - English - EN
43
To avoid false switching, we recommend
choosing the higher day switching
threshold and delay values.
INFRARED
------------------------
1>IR MODE : AUTO
2 NIGHT LEVEL : 5
3 NIGHT DELAY : 5
4 DAY LEVEL : 20
5 DAY DELAY : 30
Fig. 81
This is a dynamic self-configuration menu based on
the choice made and shows the parameters on which
it is possible to operate.
The automatic Day/Night switching mode
of the module is strongly unadvisable
when swinging is subject to repeated
light variations during the night period,
for example during patrol, or due to the
switching on of auxiliary lighting devices.
Those situations can cause numerous
unwanted switching, compromising in this
way the functioning of the module.
9.6.3.12 Advanced Setting Menu (White
Balance)
Once inside the White Balance menu it is possible to
set the following parameters:
1. Mode: Sets the type of control on White
Balance. The possible values are:
• Automatic: Sets automatic white balance.
This is the recommended setting.
• Manual: Enables manual setting of red and
blue gains.
• Outdoor: Sets fixed red and blue gains for
outdoor applications.
• Indoor: Sets fixed red and blue gains for
indoor applications.
• ATW: Enables Auto Tracing White Balance.
2. Red Value: Sets the value of the red gain.
3. Blue Value: Sets the value of the blue gain.
WHITE BALANCE
------------------------
1>MODE : MANUAL
2 RED VALUE : 0
3 BLUE VALUE: 0
Fig. 82
This is a dynamic self-configuration menu based on
the choice made and shows the parameters on which
it is possible to operate.