Videotec MAXIMUS MPXT - Manual (Page 65)

Instruc
tions manual - English - EN
63
To set the configuration parameters of the pan & tilt
by means of OSM, enable the corresponding function
using the control panel.
OSD
Fig. 130
To move around within the menu use the up and
down arrow keys, and confirm using the Enter key.
The Leave key is used to quit the submenu/menu.
For a complete description of the functions
that can be set via OSM see 9.6 Configuring
the system, page 35.
9.7.3.2 Preset and load positions
Before making these settings, we
recommend enabling Mouse PTZ control,
so that it is easier to move around in the
position to be saved.
Enter the Setup / Setup Camera Menu and select the
PTZ Preset tab.
Select the desired unit from the Media Source list (e.g.
UNIT 3) and enable the Live View function.
Fig. 131
Move to the desired position using Mouse control on
the video window.
Edit one of the boxes for the various preset positions
(Enter some text, such as Position No.2) and then
confirm by clicking on the blue button at the side.
Enter other preset positions as required.
On completion, click on Apply.