Ag Leader PF3000 Harvest & Application Operators Manual - Manual (Page 78)

DICKEY-john Seed Manager PF3000
Application Rate Mode Ag Leader Technology
April 2002 2-62
Setup for
DICKEY-john
Seed Manager or
Vanguard VM-
2500 (PIC)
Complete the following steps to set up for Seed Manager or
Vanguard VM-2500 PIC planter monitor.
A separate configuration of settings should be created for every
product applied. A maximum of 16 different configurations can
be created. The screen below illustrates two configurations set up
for a DICKEY-john.
1. Press SETUP key. Press APP RATE CONFIG key. A screen
similar to the one below should appear.
APP RATE CONFIG
PRODUCT CONTROLLER CHANNEL
CORN Seed Manager Channel 1
SOYBEANS Seed Manager Channel 1
EDIT
SETTINGS
CREATE
NEW
DELETE EXIT
Press CREATE NEW key to set up a new configuration or select
an existing configuration and press the EDIT SETTINGS key. A
new screen appears with the following settings. Select each
setting and press EDIT key to change the settings.
Controller Make: Set to DICKEY-JOHN. This setting can not
be changed once the configuration is used by one or more fields.
Controller Model: Set to SEED MANAGER. This setting can
not be changed once the configuration is used by one or more
fields.