Ag Leader PF3000 Harvest & Application Operators Manual - Manual (Page 25)

PF3000 Card Setup
Ag Leader Technology All Modes
April 2002 2-9
FILES OPTIONS
File Name 98081501.YLD
File Size 132640 bytes
Last Modified 13:42
Date 08/15/1998
COPY TO RESTORE ERASE
EXIT
FILE FILE FILE
Changing a Setting Step Action
1 Use the UP or DOWN ARROW keys to select the item you want
to change. The item is selected when a black filled rectangular box
surrounds the entire line.
2 Press the EDIT key and then use the UP or DOWN ARROW keys
to change the number or setting.
3 Once you have changed a setting press the ACCEPT key. Press
the EXIT key once you have made all the settings.
Logging Device If you are using the GPS receiver with the PF3000 you must use a memory
card to save the instantaneous GPS data.
If you... Select
Do not have a GPS receiver. NONE
Do have a GPS receiver. MEMORY CARD
NOTE: In Application Rate mode, if the PF3000 is controlling application
rate, but you don’t want to log actual rate to card set to NONE.
Logging Interval This setting determines how often the GPS information is saved to the
memory card. It also affects how large an area each GPS record will
represent on a map and how many logging hours are available before the
memory card becomes full.
There are three possible settings for the logging interval.
1, 2 or 3 Seconds
. The recommended setting is either two or three seconds.
Distance Traveled (ft)
1 sec 2 sec 3 sec
3 mph 4.4 8.8 13.2
5 mph 7.3 14.6 21.9