Ag Leader PF3000 Harvest & Application Operators Manual - Manual (Page 205)

PF3000 Checking Data Accuracy
Ag Leader Technology End of Season
April 2002 4-65
Updating Field
Maps If you are using the GPS receiver and memory cards, press the Menu Key,
SETUP, CARD, COPY TO CARD to copy memory to the card one last
time to apply the final calibration and other settings to the GPS yield data.
Read this card into a program that will read yld data directly. Print the maps
for each field.
NOTE: If you previously printed field maps but made large changes to your
data at the end of the season (particularly calibration changes), print the
maps again with the new data to ensure your maps are accurate.
Do not erase your fields until the next harvest season or until spring if you
use your monitor with a sprayer or planting controller.
* * *