Ag Leader PF3000 Harvest & Application Operators Manual - Manual (Page 180)

Site Verification PF3000
Ag Leader Technology
April 2002 4-40
Note: You should create a new file to log one kind of site verification data
(tile lines, or location of hybrids, varieties, etc.) on a card. Multiple files
can be created on the same card as long as there is enough space on the
card
Example:
Create a new file to log tile line data and then create a new file to log hybrid
data on the same card. You can read the card after you have finished
logging the tile line then save the data to your PC. Then erase the card
create a new file and then log the hybrid data.
Naming Loads
You must name the load the name of the product or item you are site
verifying. Instructions for creating and naming fields and loads are in the
setup section.
Example:
F2: WEST 80 L1: HYBRID A
L2: HYBRID B
L3: HYBRID C
Field Boundary ,
Gridding and Tile
Lines
Refer to the Boundary and Gridding instructions in the Operations Section
of this manual. To map a tile line you will need to change the monitor to
Site Verification mode. Choose your field and create a name; now create
and name a load for that tile line. The example shows Load 1 as 8 inch
plastic tile installed in 1999 and Load 2 as 12 inch clay tile installed in 1963
in Field 2 named as West 80.
Example:
F2: WEST 80 L1: 8plast99
L2: 12clay63
Making a Map
If you are using a GPS receiver and memory cards, press the MENU key,
SETUP, CARD, COPY TO CARD to copy summary information to the
files so that maps can be made.
Read this file into a program that will read the yld file formats. Print the
maps for each field.
* * *