Ag Leader PF3000 Harvest & Application Operators Manual - Manual (Page 142)

Fields and Loads PF3000
All Modes Ag Leader Technology
April 2002 4-2
Recommendations All the information recorded by the PF3000 must be recorded in a field and
load. The field and load that the monitor is set on is found on the top line of
the main operating screen.
Fields
You should at least create all the fields and name them before you begin to
use the PF3000. The monitor will use the same set of fields you create for
each operating mode (harvest mode, application rate mode, site verification
mode) of the monitor. You can create and name your fields using any
operating mode. You should choose field names that you can use year after
year.
Loads
It also recommended to create and name loads within fields before you use
the PF3000. Each operating mode of the PF3000 will have its own set of
loads for each field (except, currently site verification loads are the same as
harvest loads).
Definition:
Load: A load is used to subdivide a field into smaller sections. The
monitor load is not associated with the combine tank, wagon, or truck load.
Field
Load