Ag Leader PF3000 Harvest & Application Operators Manual - Manual (Page 70)

Mid-Tech Controller PF3000
Application Rate Mode Ag Leader Technology
April 2002 2-54
Activating
Configuration and
Setting .tgt
Prescription File 4. Exit back to main screen.
a) Press FIELD key twice.
b) Select appropriate field and press VIEW CONFIG key.
c) Select appropriate product/controller configuration and
press ACTIVE ON/OFF key to check it as active. (All
other configs must be unchecked first).
d) If you will be using a .tgt prescription file. Press EDIT
TGT FILE key, otherwise press EXIT key and skip to
step f.
e) Select .tgt file. Press VIEW INFO key to ensure it is
the correct one. After exiting view info screen, press
ACCEPT key. Press EXIT key.
f) Press ACCEPT key to accept field.
Settings on Data-
Link
Move the switch to "External Enable" position. The lights on the
Data-Link will flash back and forth when communication is
established with the PF. The Channel switch on Mid-Tech, must
be in the "Alt-Rate" position for PF to send target rate to
controller. If you do not want PF to control target rate, but want it
to record the actual rate from a channel, set the channel switch on
Mid-Tech to "ON" or "Standard" (exception: on Ag Logix, PF can
not receive actual rate without controlling target rate).
Additional
Instructions
For more information on setting Target Rate, display items, creating
and using .tgt prescription files and logging actual rate see the
Operation Section in this manual.