Ag Leader PF3000 Harvest & Application Operators Manual - Manual (Page 131)

PF3000 Calibrating Grain Weight
Ag Leader Technology (Harvest Mode)
April 2002 3-15
Step Action
1 Use the UP or DOWN ARROW keys to set the grain. Press the
ENTER WEIGHT key.
2 Refer to the next screen and change the load (and field if necessary)
to a load for which you want to enter an actual weight. Use the UP
or DOWN ARROW keys to change the field or load, depending on
which is selected.
You must have the field or load line selected (rectangular box
surrounds line) before you can change a field or load. To select
either field or load, press the key to the right of the field or load line.
3 Press the key to right of the “Act. Weight” line to select that line.
4 Use the UP or DOWN ARROW keys and enter the actual weight for
the load. Press the ACCEPT key.
5 Repeat steps 2-4, and enter all the actual weights for all the
calibration loads.
6 Press the EXIT key once you have finished to return to the screen
where you selected the grain.
7 Press the SHOW CAL LOADS key to view the screen below.
Example of calibration loads screen: