Pf3000, Dickey-john land manager, Ag leader technology – Ag Leader PF3000 Harvest & Application Operators Manual User Manual
Page 76: Application rate mode

DICKEY-john Land Manager
PF3000
Application Rate Mode
Ag Leader Technology
April 2002
2-60
Activating
Configuration and
Setting .tgt
Prescription File
4.
Exit back to main screen.
a)
Press FIELD key twice.
b)
Select appropriate field and press VIEW CONFIG key.
c)
Select appropriate product/controller configuration and
press ACTIVE ON/OFF key to check it as active. (All
other configs must be unchecked first).
d)
If you will be using a .tgt prescription file. Press EDIT
TGT FILE key, otherwise press EXIT key and skip to
step f.
e)
Select .tgt file. Press VIEW INFO key to ensure it is
the correct one. After exiting view info screen, press
ACCEPT key. Press EXIT key.
Press ACCEPT key to accept field.
Settings on Land
Manager Console
On Land Manager console, press the SYSTEM key. Select
Configuration and press Enter. Select Serial Port and press Enter.
Verify that “Active Config” is set to GPS. If it is not, select GPS
and press Enter. Verify that the GPS selection is 9600-N-8. If it is
not, select Modify Active and set Baud Rate=9600, Parity=None,
Data Bits=8 and Connect=Direct.
Additional
Instructions
For more information on setting Target Rate, display items, creating
and using .tgt prescription files and logging actual rate see the
Operation Section in this manual.