Ag Leader PF3000 Harvest & Application Operators Manual - Manual (Page 207)

PF3000 Updating Operating Program
Ag Leader Technology All Modes
April 2002 4-67
Updating from a Step Action
Memory Card 1 Using a computer and card reader, copy the file “upgrade.pld”
from the floppy disk to the memory card. Delete all other files off
the memory card.
2 Insert the memory card in the monitor and turn on the monitor.
3 The monitor will detect a new operating program on the card.
Press the SHOW FILES key. The monitor will display the version
number of the current program and new program. Press ACCEPT
key to install the new version.
4 The monitor will erase the old program and install the new
program.
5 Check some of the field/load information and settings to confirm
that the new program is operating correctly.
Using The Serial
Port Upgrade
Utility for
Windows 95 If you do not have a memory card and card reader available you can install
the Serial Port Upgrade Utility program on your computer. This utility
program enables your computer to transfer the (upgrade.pld) file to the
PF3000 using the PC interface cable.
Note:
The Serial Port Upgrade Utility program is available from Ag Leader
Technology on the Precision Map 2000 V3.3 CD or by calling (515)-232-
5363.