Ag Leader PF3000 Harvest & Application Operators Manual - Manual (Page 102)

Hiniker 8605 PF3000
Application Rate Mode Ag Leader Technology
April 2002 2-86
Setup for Hiniker
8605 controller A separate configuration of settings should be created for every product
applied. A maximum of 16 different configurations can be created. The
screen below illustrates two configurations set up for the Hiniker 8605
controller.
1. Press SETUP key. Press APP RATE CONFIG key. A screen
similar to the one below should appear:
APP RATE CONFIG
PRODUCT CONTROLLER CHANNEL
NH3 8605 N/A
Fertilizer 1 8605 N/A
EDIT
SETTINGS
CREATE
NEW
DELETE EXIT
Press CREATE NEW key to set up a new configuration or select an
existing configuration and press the EDIT SETTINGS key. A new
screen appears with the following settings. Select each setting and press
EDIT key to change the settings.
Controller Make: Set to HINIKER
Controller Model: Set to 8605.
Product: Press EDIT key. You can select an existing product
and press ACCEPT key or create a new product by pressing
CREATE NEW key. Press EDIT NAME key and enter name of
product. Use Left or Right Arrow keys to select a character. Use
Up or Down Arrow key to change the character. To erase a
character in the name, highlight that character and use UP or
DOWN ARROW key to scroll to the blank space between "9"
and "A". Set every character and press ACCEPT key twice.
Units: Set to Units/Acre of application. Set to POUNDS if
applying fertilizer. Set to GALLONS if applying liquid.