Ag Leader PF3000 Harvest & Application Operators Manual - Manual (Page 189)

PF3000 Printing Field/Load Summary
Ag Leader Technology Harvest Mode
April 2002 4-49
Follow these steps to set the monitor to communicate with the computer:
Step Action
1 Turn on the PF3000.
2 After the monitor displays the currently selected field (it does not
make any difference which field the monitor is set on), press the
Menu Key, SETUP, MEMORY, PRINT SUMMARY “Print Field
Summary” will appear on the display.
3 Press Enter (or Return) on the PC keyboard. If “Type PRINT,
NAME or START & press Enter” appears on the PC display every
time you press Enter, you have established proper communications.
If “Type PRINT, NAME or START & press Enter” does not appear on the
PC display, perform the following procedures:
•
Recheck the parameters you set in the Communications dialog box
under the Settings menu. If the settings are correct, try setting a different
COM port in case the COM port you are using is not the port to which
the monitor cable is connected.
•
If you still do not have communications, check the cable connection to
determine whether you are connected to something other than a COM
port.
•
If communications still are not established, follow these steps:
Step Action
1 Turn off the PF3000, then turn it back on.
2 Press the Menu Key, SETUP, MEMORY, PRINT SUMMARY
“Print Field Summary” will appear on the display.
3 Press Enter (Return key) on the PC keyboard and look for the
message “Type PRINT, NAME or START & press Enter”
•
If you are unable to establish communications, call Ag Leader
Technology at 515-232-5363 for assistance