Ag Leader PF3000 Harvest & Application Operators Manual - Manual (Page 204)

Checking Data Accuracy PF3000
End of Season Ag Leader Technology
April 2002 4-64
Step Action
1 Press Menu Key, SETUP, and GRAIN key
2 On the Grain Setup screen, arrow down to the desired grain type,
press EDIT SETTINGS.
3 Arrow down to Dry Moisture, press EDIT, use the up or down arrow
to enter the dry moisture value.
If you do not have a printed summary, look at the field and load averages on
the monitor to check for high average moisture. Press the GRAIN key to
check the Dry % value for each grain type harvested.
Acres Check the number of acres for each field and load, ensuring they are correct.
If you know the exact number, you can set the field acres that the monitor
measured to the exact number of acres in the field. You can also change the
load acres. Refer to the Acre Calibration instructions in the Acre Counting
section for more information.
Grain Type Review, each load in each field, ensuring it is set on the correct grain type.
Refer to the Grain Type section for more information about changing the
Grain Type.
Field/Load Name Review all fields and loads, ensuring that you have entered the correct
names. If you have not entered a name for a field or load yet, you still can.
NOTE: Enter a field name and number that identifies the same location
year-to-year for more accurate management and comparison of field data.
Updating the
Monitor All changes made to the data in the monitor will automatically be saved to
memory with the monitor is shut down. After making changes to the
monitor data, print another summary.