Ag Leader PF3000 Harvest & Application Operators Manual - Manual (Page 27)

PF3000 Card Setup
Ag Leader Technology All Modes
April 2002 2-11
Copying Data to
Log File
To copy memory to log files that are not set as the current log file, press the
SHOW FILES key and select one of the log files. Press the FILE OPTIONS
key and press the COPY TO FILE key. At the card setup screen, press the
COPY TO CARD key to copy memory to the file set as the log file (this is the
same copy to card function that automatically occurs when monitor is shut
off).
Restoring from
File You can restore field and load data into the monitor’s memory from a log file
on a memory card.
IMPORTANT: It is dangerous to restore memory from a card because
the current data in the monitor will be replaced with the data on card.
Step Action
1 Press the SHOW ALL FILES key. Select the log file and press the
FILE OPTIONS key. Press the RESTORE FILE key.
2 Press the RESTORE key again if you really want to restore the data.
3 Press the EXIT key once you are finished.
Erasing File
You can erase individual log files from a memory card
Step Action
1 Press the SHOW ALL FILES key. Select the log file and press the
FILE OPTIONS key. Press ERASE FILE key.
2 Press the ERASE key again if you really want to erase the file.
3 Press the EXIT key once you are finished.
* * *