Ag Leader PF3000 Harvest & Application Operators Manual - Manual (Page 34)

Marker Setup PF3000
All Modes Ag Leader Technology
April 2002 2-18
Changing a Setting Step Action
1 Use the UP or DOWN ARROW keys to select the mark. The mark
is selected when a black filled rectangular box surrounds the entire
line.
2 Press the EDIT NAME key to rename an existing mark. Use the
UP or DOWN ARROW keys to change a character in the name.
Use the LEFT or RIGHT ARROW keys to move the cursor over
another character within the name. Press the ACCEPT key after
you have changed the name.
3 Press the EDIT TYPE key to set the mark for continuous or spot
marking. Use the UP or DOWN ARROW keys to change the
setting. Press the ACCEPT key after you have changed the setting.
4 Press the EXIT key once you have made all the settings.
Continuous marking
Set the marking type to continuous if the item in the field you are marking
requires you to make several marks in a row (for example: marking large
weed patches or tile lines).
When you press a mark key that is set for continuous marking, the mark will
remain on until you press the mark key again to turn off the mark.
Spot marking
Set the marking type to spot if the item in the field you are marking requires
just one mark (for example: marking a rock or tile hole).
When you press a mark key that is set for spot marking, the mark will
remain on only for a few seconds and then will automatically go off.
* * *