Ag Leader PF3000 Harvest & Application Operators Manual - Manual (Page 209)

PF3000 Navigate
Ag Leader Technology All Modes
April 2002 4-69
Introduction
Use the navigate function to return to a specific point in a field. You can
navigate in any operating mode.
There are two ways to navigate:
1. Navigate to points in a grid file (*.PFN).
2. Navigate to a latitude and longitude that you have manually entered.
The target points will display one-at-a-time while navigating. The display map
scales to the navigation files scale, or a boundary file if available, or the scale
between your current location and the entered LAT/LON position. The map
will not re-scale as you move closer or farther away from the target.
You may log data in this mode by moving the Acre Count Switch to the UP
position. The logged data is stored in a *.YLD file and data will be stored in the
active field and load.
Navigate Screen
To use either navigate function, press the MENU key until OPTIONS is
displayed and press OPTIONS key. Press the NAVIGATE key to display the
following:
F1: HESTERSE L1: DG
TARGET TYPE:
FILE
ACCEPT EXIT