Ag Leader PF3000 Harvest & Application Operators Manual - Manual (Page 113)

PF3000 Flowmeter Controller
Ag Leader Technology Application Rate Mode
April 2002 2-97
Setup for Flow
Meter A separate configuration of settings should be created for every product
applied. A maximum of 16 different configurations can be created. The
screen below illustrates two configurations set up for the Flow Meter
controller.
1 Press SETUP key. Press APP RATE CONFIG key. Press
CREATE NEW key. Set the following:
APP RATE CONFIG
PRODUCT CONTROLLER CHANNEL
Fertilizer Liquid N/A
Hybrid A Planting N/A
EDIT
SETTINGS
CREATE
NEW
DELETE EXIT
Controller Make: Set to FLOWMETER.
Controller Model: Set to LIQUID or GRANULAR or
PLANTING, whichever bests fits the type of product and field
operation.
Product: Press EDIT key. You can select an existing product
and press ACCEPT key or create a new product by pressing
CREATE NEW key. Press EDIT NAME key and enter name of
product. Use Left or Right Arrow keys to select a character. Use
Up or Down Arrow key to change the character. To erase a
character in the name, highlight that character and use UP or
DOWN ARROW key to scroll to the blank space between "9"
and "A". Set every character and press ACCEPT key twice.
Units: Set to Units/Acre of application.
Ground Speed Sensor: Set to RADAR or GPS.
App Distance From GPS: Ignore this setting.
Tgt Units:Contrler Units: Ignore this setting.
Target Rate Increment: Ignore this setting.