Ag Leader PF3000 Harvest & Application Operators Manual - Manual (Page 66)

Mid-Tech Controller PF3000
Application Rate Mode Ag Leader Technology
April 2002 2-50
Setting up Mid-
Tech controllers
that are connected
to Data-Link
consoles Complete the following steps to set up for Ag Logic, TASC 6000,
6100, 6200, 6300, 6500, 6600 with Data Link.
A separate configuration of settings should be created for every
product applied. A maximum of 16 different configurations can be
created. The screen below illustrates two configurations set up for a
Mid-Tech.
1. Press SETUP key. Press APP RATE CONFIG key. A screen
similar to the one below should appear.
APP RATE CONFIG
PRODUCT CONTROLLER CHANNEL
Treflan TASC 6100 Carrier
Roundup TASC 6100 Carrier
EDIT
SETTINGS
CREATE
NEW
DELETE EXIT
Press CREATE NEW key to set up a new configuration or select
an existing configuration and press the EDIT SETTINGS key. A
new screen appears with the following settings. Select each
setting and press EDIT key to change the settings.
Controller Make: Set to MIDTECH. This setting can not be
changed once the configuration is used by one or more fields.
Controller Model: Set to the MIDTECH model you have. For
example: TASC 6100 etc. This setting can not be changed once
the configuration is used by one or more fields.
Product: Press EDIT key. You can select an existing product and
press ACCEPT key or create a new product by pressing CREATE
NEW key. Press EDIT NAME key and enter name of product.
Use Left or Right Arrow keys to select a character. Use Up or
Down Arrow key to change the character. To erase a character in
the name, highlight that character and use UP or DOWN ARROW
key to scroll to the blank space between "9" and "A". Set every
character and press ACCEPT key twice.