Figure 18: configure date and time (manually), Figure 17 – HP StorageWorks 2.140 Director Switch User Manual
Page 76
Monitoring and managing the Director
74
Director Element Manager User Guide
Figure 17: Configure Date and Time Periodic Synchronization dialog box
To immediately synchronize the director date and time with the HAFM
appliance, be sure the Periodic Date/Time Synchronization option is
enabled and then click Sync Now.
Note:
If you enable the Periodic Date/Time Synchronization option and click
Activate,
the time will synchronize at the next update period.
To set the director with a specific date and time, make sure that the Periodic
Date/Time Synchronization field is not selected (see
). Enter the
date and time, and then click Activate.
Figure 18: Configure date and time (manually)
Note:
Use the range of 0 to 23 for hours. Use the range of 0 to 59 for minutes and
seconds.
■
Set Online State—Click this option to display the Set Online State dialog
box. The dialog box displays the current state (offline or online) and provides
a button for changing the state.